Spray-Slick®
Contains non-plant food ingredients
PRINCIPAL FUNCTIONING AGENTS
Methylated seed oil, Polyether modified heptamethyltrisiloxane, alkylphenol
ethoxylate.....100%
TOTAL.....100%
All ingredients in this product are exempt from a tolerance under 40 CFR 180.
CA Reg. No. 95428-50004 WA Reg. No. 95428-24006
Spray-Slick®
A unique blend of highly refined and modified spray oil and nonionic organo-modified silicone surfactant
The unique chemistry of Spray-Slick® allows for enhanced wetting and absorption of those pesticides or products, which labels recommend the addition of a spray adjuvant to improve performance. The addition of Spray-Slick® to a spray tank solution will improve a spray application by physically modifying the wetting and spreading characteristics, the result being a more uniform spray deposit. Observe the initial application to ensure thorough coverage without excessive runoff of the spray.
Benefits
- Methylated Seed Oil (MSO) to aid in penetration through the leaf tissue
- Improves spray application by physically modifying the wetting and spreading characteristics of the spray droplet
- Provides a more uniform spray deposit for improved uptake by the plant
-
Directions & Usage
-
Availability
Mixing
Prior to pesticide application, clean mixing and application equipment according to pesticide label directions. To minimize foaming fill spray tank 2/3 or 3/4 full of water and begin agitation. If foaming is anticipated the addition of an anti-foaming agent should be added before pesticides, nutrients, or Spray-Slick®. Add pesticides and/or fertilizers as directed by
label or in the following sequence:
1. Micronutrients and fertilizer;
2. Dry flowables and dispersible granules;
3. Flowables;
4. Water soluble pesticides;
5. Emulsifiable concentrates.
Continue agitation and add Spray-Slick® when completed, reduce agitation and allow to mix for 1 to 2 minutes. While under minimal agitation, continue filling tank and allow to mix for 10 to 15 minutes prior to application. NOTE: For optimum results, spray mixes containing Spray-Slick® should be applied within 36 hours.
Recommendations
Spray-Slick® is intended for agricultural and non-agricultural uses. The use of Spray-Slick® can increase pesticidal activity where the following factors occur, but is not limited to:
1. Low humidity and high temperatures;
2. Low water volume rates of less than 15 gallons per acre; and
3. When target species are larger than the label recommendations at time of application.
Recommended Rates:
Ground Applications: 3 - 5 pints per 100 gallons
NOTE: The application rates on this label are based on pesticide labels which recommend the use of a nonionic surfactant. Rates of this product may be increased or decreased for optimum results, follow pesticide labeling for proper recommendations. Before using
Spray-Slick® where a nonionic surfactant may not be recommended the user or applicator advisor must have experience with the combination or must have conducted a phytotoxicity trial.
Contact your Simplot Turf & Horticulture representative for availability.
Available
Not Available