Spray-007™
Contains non-plant food ingredients
Read and follow the precautions, restrictions, and recommendations on the labels of pesticides used with SPRAY-007™. Use according to the most restrictive label directions for each product in any tank mix.
Compatibility:
SPRAY-007™ is compatible with most pesticides. However, if the desired combination has not been previously used, a compatibility test is recommended.
Mixing: Shake well before using. Fill spray tank ½ full of water and begin agitation. Add the recommended amount of SPRAY-007™. Add products as directed by label or in the following sequence and continue filling tank: (1) Dry flowables or water dispersing granules, (2) Wettable powders, (3) Flowables, (4) Solutions, (5) Emulsifiable concentrates. Continue agitation until spray solution is completely mixed. Continuous agitation of finished spray is recommended. If spray solution has been allowed to stand, thoroughly agitate and remix before application.
Recommendations:
Specific use rates will vary with conditions of application such as water hardness, application method, equipment, spray droplet size, condition of foliage, etc. Also, higher rates than those below may be used if recommended by pesticide labeling. Follow pesticide label directions. However, do not add this product at a rate which exceeds 5% of the finished spray volume.
Acidifier / Buffering Agent
Application / Rate
Highly alkaline water (pH 8 or higher): 8–16 fl oz per 100 gals of spray mixture
Mildly alkaline/acid water (pH 6.5 to 8): 4–8 fl oz per 100 gals of spray mixture
General Use
Application / Rate
Defoliants, Desiccants, Herbicides: 1–4 pints per 100 gals of spray mixture when used as a surfactant/penetrant. Use 12 oz – 2 pints/acre when used in place of crop oils.
Acaracides, Fungicides, Insecticides, Plant Growth Regulators: ½–2 pints/100 gals of spray mixture
Turf, Ornamental, and Industrial Spraying: Use 1–3 fl oz/5 gals (1–4 pints/100 gals) of spray mixture. For hand-held and backpack
sprayers use 1 fl oz/gal of water*
*NOTE: Plant sensitivities to this product have been found acceptable; however, not all species have been tested. Before treating a large area, test on a small area and observe prior to full scale application.
Spray-007™
SPRAY-007™ is a low-foam surfactant blend that enhances the activity and effectiveness of spray applications.
SPRAY-007™ provides more uniform coverage by decreasing surface tension of spray solutions, thus aiding in penetration. It may be used as an acidifying agent to lower pH of spray solutions, thus preventing alkaline hydrolysis of pesticides sensitive to high pH. SPRAY-007™ may be used on agricultural, aquatic, forestry, turf and ornamental, industrial, structural and non-cropland sites.
Benefits
- NPE-Free surfactant formulation promotes uniform coverage of spray droplets
- Improves uptake and serves as a deposition aid
- Acidifier protects chemistries that are sensitive to high pH water sources
-
Directions & Usage
-
Availability
Spray-007™ is a non-ionic, low foam surfactant that enhances the activity and effectiveness of pesticides.
Spray-007™ provides more uniform coverage by decreasing surface tension of spray solutions, thus aiding in penetration. It may be used as an acidifying agent to lower pH of spray solutions, thus preventing alkaline hydrolysis of pesticides sensitive to high pH.
Spray-007™ may be used on agricultural, aquatic, forestry, turf and ornamental, industrial, structural and non-cropland sites.
NOT FOR AQUATIC USE IN WASHINGTON.
Read and follow the precautions, restrictions and recommendations on the labels of pesticides used with Spray-007™.
Use according to the most restrictive label directions for each product in any tank mix.
Contact your Simplot Turf & Horticulture representative for availability.
Available
Not Available